Computation of groundwater resources and recharge in Chithar River Basin, South India

Groundwater recharge and available groundwater resources in Chithar River basin, Tamil Nadu, India spread over an area of 1,722 km² have been estimated by considering various hydrological, geological, and hydrogeological parameters, such as rainfall infiltration, drainage, geomorphic units, land use, rock types, depth of weathered and fractured zones, nature of soil, water level fluctuation, saturated thickness of aquifer, and groundwater abstraction. The digital ground elevation models indicate that the regional slope of the basin is towards east. The Proterozoic (Post-Archaean) basement of the study area consists of quartzite, calc-granulite, crystalline limestone, charnockite, and biotite gneiss with or without garnet. Three major soil types were identified namely, black cotton, deep red, and red sandy soils. The rainfall intensity gradually decreases from west to east. Groundwater occurs under water table conditions in the weathered zone and fluctuates between 0 and 25 m. The water table gains maximum during January after northeast monsoon and attains low during October. Groundwater abstraction for domestic/stock and irrigational needs in Chithar River basin has been estimated as 148.84 MCM (million m³). Groundwater recharge due to monsoon rainfall infiltration has been estimated as 170.05 MCM based on the water level rise during monsoon period. It is also estimated as 173.9 MCM using rainfall infiltration factor. An amount of 53.8 MCM of water is contributed to groundwater from surface water bodies. Recharge of groundwater due to return flow from irrigation has been computed as 147.6 MCM. The static groundwater reserve in Chithar River basin is estimated as 466.66 MCM and the dynamic reserve is about 187.7 MCM. In the present scenario, the aquifer is under safe condition for extraction of groundwater for domestic and irrigation purposes. If the existing water bodies are maintained properly, the extraction rate can be increased in future about 10 % to 15 %.     

Concentrations of Hchs and Ddts in the Tissues of River Dolphins,Platanista Gangetica,From the River Ganges,India

Abstract

Concentrations of HCH and DDT organochlorine insecticide residues were measured in blubber, muscle and oil samples from three specimens of river dolphins, Platanista gangetica, from the River Ganges, India. Concentrations of HCH and DDT ranged from 94 to 289 ng g^?1 and from 1324 to 9388 ng g^?1 on wet wt. basis respectively. Comparisons are made with other aquatic mammals and other studies on river dolphins. P. gangetica appears to exhibit similar patterns of accumulation with age and with ß-HCH and p-p′-DDE being accumulated to higher levels than other HCH isomers and parent DDT and its other metabolites, respectively. These organochlorines may pose a health risk to river dolphin populations that are already showing evidence of environmental stress. Further studies are recommended.     

Influence of acetic acid soaking and mechanical grinding treatment on the properties of treated recycled aggregate concrete

Journal of Material Cycles and Waste Management - The utilization of recycled aggregate (RA) extracted from construction and demolition (C&D) waste contributes to reducing the usage of...     

Strong variability in bacterioplankton abundance and production in central and western Bay of Bengal

With large influx of freshwater that decreases sea-surface salinities, weak wind forcing of <10 m s⁻¹ and almost always warm (>28°C) sea-surface temperature that stratifies and shallows the mixed layer leading to low or no nutrient injections into the surface, primary production in Bay of Bengal is reportedly low. As a consequence, the Bay of Bengal is considered as a region of low biological productivity. Along with many biological parameters, bacterioplankton abundance and production were measured in the Bay of Bengal during post monsoon (September–October 2002) along an open ocean transect, in the central Bay (CB, 88°E) and the other transect in the western Bay (WB). The latter representing the coastal influenced shelf/slope waters. Bacterioplankton abundances (<2 × 10⁹cells l⁻¹) were similar to those reported from the HNLC equatorial Pacific and the highly productive northern Arabian Sea. Yet, the thymidine uptake rates along CB (average of 1.46 pM h⁻¹) and WB (average of 1.40 pM h⁻¹) were less than those from the northwestern Indian Ocean. These abundances and uptake rates were higher than those in the oligotrophic northwestern Sargasso Sea (<7 × 10⁸ cells l⁻¹; av 1.0 pM h⁻¹). Concentrations of chlorophyll a (chl a), primary production rates and total organic carbon (TOC) were also measured for a comparison of heterotrophic and autotrophic production. In the WB, bacterioplankton carbon biomass equaled ∼ 95% of chl a carbon than just 31% in the CB. Average bacterial:primary production (BP:PP) ratios accounted for 29% in the CB and 31% in the WB. This is mainly due to lower primary productivity (PP) in the WB (281 mg C m⁻² d⁻¹) than in the CB (306 mg C m⁻² day⁻¹). This study indicates that bacteria–phytoplankton relationship differs in the open (CB) and coastal waters (WB). Higher abundance and contrastingly low bacterial production (BP) in WB may be because of the riverine bacteria, brought in through discharges, becoming dormant and unable to reproduce in salinities of 28 or more psu. Heterotrophic bacteria appear to utilize in situ DOC rather rapidly and their carbon demand is ∼50% of daily primary production. It is also apparent that allochthonous organic matter, in particular in the western Bay, is important for meeting their carbon demand.     

Contamination and bioaccumulation of benzotriazole ultraviolet stabilizers in fish from Manila Bay, the Philippines using an ultra-fast liquid chromatography-tandem mass spectrometry

Methyl methacrylate (MMA) is grafted on multiwalled carbon nanotubes (MWCNTs) by using N₂ plasma technique. The MMA grafted MWCNTs (MWCNT-g-pMMA) are characterized by using Raman spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis-differential thermal analysis (TGA-DTA), and potentiometric acid-base titration method. The application of MWCNT-g-pMMA in the removal of 4,4′-dichlorinated biphenyl (4,4′-DCB) from large volumes of aqueous solutions is investigated under ambient conditions. The results indicate that the adsorption of 4,4′-DCB on MWCNT-g-pMMA is much higher than that of 4,4′-DCB on MWCNTs, and the adsorbed 4,4′-DCB is difficult to be thermally decomposed from MWCNT-g-pMMA according to the TGA-DTA analysis. MWCNT-g-pMMA are suitable materials in the preconcentration and immobilization of polychlorinated biphenyls (PCBs) from large volumes of aqueous solutions in environmental pollution cleanup.     

Optimization of grid tied hybrid power system in smart premises

Tapping of renewable energy sources like solar and wind is given great priority by power producers all over the world. Technical problems of linking them to the grid are solved. The cost constraints of utilizing renewable energy at specific locations are to be determined. In this work, a model is developed for grid tied hybrid power system (HPS) consisting of photovoltaic (PV) module and wind mill at the roof top of smart premises. The grid is capable of delivering and receiving energy. Objective function is formed with constraints taking into account the cost of PV module, wind mill, and grid tied inverter with controller. The constraints are rating of HPS and energy that can be delivered to the grid. Using this model, case studies were conducted in three locations in India, each location having two different demands. The results are presented. With the optimal rating of HPS, results shows that, conventional energy cost is higher.     

Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs

While the concepts of remanufacturing and reverse logistics are gaining popularity in practice, the available literature and theory on strategic decision making in these areas are limited. This paper is designed to address this gap, in particular, for the automotive industry aftermarket. In doing so, the authors reviewed literature pertaining to: customer demand(s), product design and development, cost-benefit analysis of reman, core (i.e., used product) supply management, reman competencies and skills, product life cycle strategies, reman and reverse logistics network design, relationships among key stakeholders, environmental considerations, regulations, and impact of emerging economies. The literature findings along with our experience in working with automotive reman products were used as inputs to guide the formulation of seven major propositions for the strategic factors in decision making within reman. The propositions were then tested through a case study. The case study reconfirmed many of the factors like product life cycle, regulations, etc. from the literature review and also identified new factors like OE customer requirements. Our results provide a foundation for further research for companies that deal with Original Equipment (OE) Sales, Original Equipment Service (OES), as well as Independent Aftermarket (IAM) business in the automotive industry.     

Investigating the impacts of treated effluent discharge on coastal water health (Visakhapatnam,SW coast of Bay of Bengal,India)

The present study investigated the impacts of treated effluent discharge on physicochemical and biological properties of coastal waters from three pharmaceuticals situated along the coast of Visakhapatnam (SW Bay of Bengal). Seawater samples were collected (during the months of December 2013, March 2014 and April 2014) from different sampling locations (Chippada (CHP), Tikkavanipalem (TKP) and Nakkapalli (NKP)) at 0- and 30-m depths within 2-km radius (0.5 km = inner, 1 km = middle and 2 km?=?outer sampling circles) from the marine outfall points. Physicochemical and biological parameters, which differed significantly within the stations, were likely to be influenced by strong seasonality rather than local discharge. Dissolved oxygen variability was tightly coupled with both physical and biological processes. Phytoplankton cell density and total chlorophyll (TChla) concentrations were significantly correlated with dissolved inorganic nutrient concentrations. CHP (December) represented a diatom bloom condition where the highest concentrations of diatom cells, total chlorophyll (TChla), dissolved oxygen coupled with lower zooplankton abundance and low nutrient levels were noticed. The centric diatom, Chaetoceros sp. (>?50%) dominated the phytoplankton community. TKP (March) represented a post-diatom bloom phase with the dominance of Pseudo-nitzschia seriata; zooplankton abundance and nutrient concentrations were minimum. Conversely, NKP (April) represented a warm well-stratified heterotrophic period with maximum zooplankton and minimum phytoplankton density. Dinoflagellate abundance increased at this station. Relatively higher water temperature, salinity, inorganic nutrients coupled with very low concentrations of dissolved oxygen, TChla and pH were observed at this station. Copepods dominated the zooplankton communities in all stations and showed their highest abundance in the innermost sampling circles. Treated effluent discharge did not seem to have any significant impact at these discharge points.